2. digital
  3. 177141-118913

Need help with Mutec MC3+ USB, Esoteric Clock and dCS Network Bridge

Over the years I have ended up buying multiple boxes as written above, also including Marantz SA10 CDP, Adagio DAC, and a custom-built server not to mention a preamp and monoblocks. How I ended up with that many gears is a very fascinating story for some other day to tell.

So when I got my hands on the Esoteric G02x clock, I connected it with dCS NB but I always wanted to use it for SA10 and server also. So I bought Mutec. I plan to connect the Mutec with the server via USB, NB with AES, SA10 with coaxial (SPDIF in on Mutec) , and Adagio with BNC cable (SPDIF out on Mutec)

Now Esoteric will be used as the Master clock (10MHz output on the clock) and connected to the Mutec (WCLK in) and a clock out of Esoteric to the dCS word clock in.

Am I doing it right? Also, the Master clock output on Esoteric is 50Ohm while WCLK input on Mutec is 75Ohm. So which BNC cable, 50 or 75ohm should be used?

rsjaurr
Post removed 
Post removed 
rsjaurr OP
18 posts
 

I have connected all three sources, the cd player, dCS NB, and custom-made server to the Mutec via coaxial, AES and USB cable respectively, and its output to the DAC via BNC cable. Mutec is also connected to the Esoteric clock bypassing all other clocks in the system.

I just needed something like Mutec to connect the dots (different gears) in a sense.

More to discover