Nakamichi SR versus TA


I have an SR-4A as my main receiver and an SR-3A as my upstairs receiver. My SR-4A appears to have better significant stats than later non-Stasis Nakamichi receivers.

The TA-4A has a higher power rating than the SR-4A and a more complete remote.

My SRs are rock solid. I've read that for the TAs, Nakamichi moved manufacture out of Japan and therefore they are not as solid as SRs.

I've been very happy with my SRs but wondering if it may be worth picking up a TA-4A if one becomes available.
wilsoj2
I love my SR-4A but miss the remote; it got stolen. I cannot find a working code on universal remotes and factory cannot supply a replacement. Can any one help or provide guidance? Thanks
Reply to: brbhan@lightningone.net
I have an SR 3A and a TA 2A. I have found the SA to be more solidly built and less vulnerable to (inadvertant!)jarring and bumping.
My first SR4A started occasionally loosing a channel. So I installed the TA4A I had bought a couple of years ago as back-up.

Right now I am running an SR4A on my main system and the TA4A on my third floor system. I've had both the TA and an SR patched into the same system.

The TA does seem to have more bass though (agreeing with infinitebaffle) I think the SR has a more nuanced sound.
Anyone have an owners manual for a Nakamichi SR-4A? I was using it to run my Magnepan SMGc speakers but at 4ohm I decided to use a bigger amp. Bought a B&K 1400ii and connected to SR-4A via pre-outs but I get no volume control. Just full volume from B&K with no Nak control.
Another major difference between the SR and TA a lines is that the TA added "Pre-Out" and "Main-In" jacks on the back. They came with jumpers that can be removed and allow for introducing a signal processor or using these receivers for either their pre-amp or power amp sections. I can attest to the comments about the TA's that were made in China has inferior solder joints that fail over time and result in a channel dropping out or popping... that is what killed mine after some 25 years and for some reason shops do not seem to be able to trace the cause as I had it 'repaired' twice yet it still demonstrates the problem.