Any thoughts on using brass polish/cleaners?
My overlooked cheap tweak
I was lubricating the gears on my transport last night, and after reassembling it, decided to clean the digital cable and the jacks. There was a lot of junk on the Q-tips I used. After the cleaning, there was a really big improvement in sound. It wasn't the transport lube that did it, as it was just the gears that open and close the drawer, not the CD playing mechanism.
I used to do this regularly, but hadn't done it in +/- five mos. I don't know about the rest of you, but I could do my system maintenance a bit more often. Of course I've bought a new PC or two in the last 5 mos at a few hundred a pop. This two Q-tip tweak was right up there with the new PC's. It was the best 10 cent tweak I've had in a long while. Hope this reminds someone out there.
If you haven't cleaned your IC's and jacks before, and don't want to invest too much, you can use isoprpyl alcohol and Q-tips with most of the cotton pulled off. Rub in and outside the RCA jacks and the IC's. Wait until they dry before plugging them back in.
I used to do this regularly, but hadn't done it in +/- five mos. I don't know about the rest of you, but I could do my system maintenance a bit more often. Of course I've bought a new PC or two in the last 5 mos at a few hundred a pop. This two Q-tip tweak was right up there with the new PC's. It was the best 10 cent tweak I've had in a long while. Hope this reminds someone out there.
If you haven't cleaned your IC's and jacks before, and don't want to invest too much, you can use isoprpyl alcohol and Q-tips with most of the cotton pulled off. Rub in and outside the RCA jacks and the IC's. Wait until they dry before plugging them back in.
- ...
- 18 posts total
- 18 posts total