My Experience With Tekton


I know this is a polarizing discussion point and was thus hesitant to share unless I could keep it objective, helpful, and concise

I have no intention to be inflammatory, sway anyone’s current opinion or beliefs

I merely want to share information in two specific areas, my results of product performance and my experience with the manufacturer

 

Background and reference point

I replaced a pair of Revel F36. The F36 is the upper end of Revel’s lowest tier floorstanding speakers and retails for $2,000 MSRP per pair

Took approx. 45 mins to unbox, level and connect

Like for like drop-in replacement, same location on the floor as the F36s, the listening position did not change, identical electronics and cables

We’ve all got our preferences, biases, different levels of experience, etc; but share the common limitation that we just don’t know what we don’t know

I’ve not heard a pair of 30K speakers but expect to someday and envy those that own them

In my VERY limited understanding, it’s near impossible to pinpoint how any specific system change will behave and perform across the board, contingent on the variances in electronics, set up and room. These three items alone (electronics, setup and room) make me think that while similar in nature, but at a critical listening level, each combination is unique and a different snowflake or fingerprint

 

Listening results

Product delivers as advertised

Meets or exceeds every performance expectation I had hoped for

After approx. 5 hours of listening over 3 days I tried to characterize the sound. The first thought was neutral, but that was understating what I was hearing. I eventually landed on natural or real. The voices and the instruments sound VERY real to me. This is as close as I have come with my electronics, setup and room to sensing that someone is singing to me or that someone or an entire band is playing for me

To date, each song that I’ve played, is the best version of that song that I have heard in a playback, and I’ve listened to all of them 100s and 100s of times

Some of the improvement was by a small margin, but most songs, 65% conservatively speaking, by a vast margin – night and day, game changing stuff

Chet Baker didn’t sound like a presentation from 1958, it sounded as fresh and real as a new recording with the benefits of 60 years of technology advancements. Exile on Main Street didn’t sound like a home recording from 1972 it sounded like 2022 with many layers of percussion, keyboards, horns and background vocals

Is the sound of this $5,000 pair of speakers comparable to the sound of a $30,000 pair of speakers? I don’t know, as mentioned I’ve not heard a pair of $30,000 speakers.

What I do know is the $5,000 pair of speakers, simply put is the best my system has sounded by a wide margin

Again in summary, it sounds real, like someone is singing to me

 

Experience with the manufacturer

I had hemmed and hawed for 2 or 3 months before placing my order. One day the website mentioned a future price increase but until mmdd you could still order at the current price

I called and spoke with Tammy and told her I wanted to lock in on the current price point but wasn’t sure what product or configuration I wanted

She built an open-ended order with current pricing and told me to contact her when I knew what I wanted

With work travel and other commitments it took me 4 months to finalize which speaker, Moab, which upgrades, beryllium tweeters and Cardas connectors, and what color, white

I was never pressured to make up my mind or that my window for the lower costs was going to expire

Since I was the one dragging my feet, I offered multiple times to pay for the product

Not once did they hint or take me up on my offer to pay in advance

They did not bill me until the product shipped

Once I had made all the config decisions, the build and delivery were again, as advertised

Tammy mentioned a 4–6-week supply chain delay with beryllium, that arrived within her estimated timeframe

Once the beryllium arrived, she said she was waiting on cabinets, eta 5-7 days, followed by build and paint, and shipping approx. 10 days after she received the cabinets

Within 2 weeks Tammy emailed my owner’s manual, unpacking instructions and told me to expect a call from the freight company within the next week

Freight company contacted me on that Fri and scheduled delivery for the very next Mon, Aug 30

The boxes arrived scuffed and with multiple impact points that dented the packing material

There are no blemishes or damage to either speaker cabinet, the packing and packaging worked as designed

Upon unpacking, I didn’t experience a heavy smell of paint or wood, if I put my nose to the cabinet, I could smell fresh paint

The cabinet finish or construction does not appear inferior to anything else in my inventory, KEF, Revel, Klipsch, Paradigm, Polk, and Elac – permission in advance to laugh

Enjoy the journey and happy listening

Respectfully


stevewharton
@nonoise
You're correct this is a confessional psychiatrist couch, this thread became a global chat of sorts from speakers to cars and punctuation grammar, and direct attacks and multi driver discussion, I'm lost already. The OP stated in the 1st line this is polarizing, that was profetic.
@charles1dad and @three_easy_payments agreed that Devore was onto something when he turned that corner at the end of the 90s, yes what Ralph have been saying and don't forget Duke LeJeune which also designs impedance friendly high efficient speakers. I personally found out impedance to be more critical to the sound than sensitivity assuming you have plenty of watts to throw at it.
Did I miss something? Where's the manufacturer (Eric?), I would be pretty involved.

@three_easy_payments
We should really be asking why this brand evokes such a response.

Ok what do you think?


I looked at the first review that popped up: http://www.enjoythemusic.com/magazine/equipment/0121/Tekton_Moab_Floorstanding_Speakers_Review.htm
It said:
It inspires incredulity. What's the point of 17 drivers per side, even in a smart-on-paper quasi-D'Appolito array? Won't that result in severe comb filter effects? What about phase-accuracy problems? Also, was the Tekton team trying to trigger my trypophobia?

In any case the 98 dB/2.83v specification looks impressive.

Hello Tekton owners/aficionados, I’m getting ready to take the leap into the Ulfberht club and am looking for anyone within a few hours drive from Northern Virginia who would allow me to hear their speakers.  I heard the Moabs briefly a few years ago at a show and liked them, but really need to hear the Ulfs or the Moab’s again.  I’ve got a pretty decent wine cellar and would love to bring something nice with me to either share or leave for my host.  I’d also be happy to have folks come listen to the Dynaudio Consequence Ultimates I have now as a comparison.

@mozartfan The perfect set 15 look cute, especially the 7 HF/Mid diver array, don’t you think so?

OK, the perfect set 15 is $2190 a pair that is included shipping in the US. I know, I know, those HF/Mid Audax drivers are only $35 a pop but add up 14 of them is whopping $490 that is at least 20% of the speakers’ asking price. I Google around the web, people seem to endorse the cheap Audax’s sound quality, for $35, what else can you get really, that is proven, has good heritage, and is not made in China (OK that was a joke)? I think Eric does his design and research work very carefully.

 

The pricing of Tekton is very generous. By contrast, look at those greedy big distributors, name one: Tone Imports, they mark up minimal 200% to US consumers on the stuffs they represent. Line Magnetic for example, they sell for less than half the price in the domestic market, and because of the trade agreement, the factory refuses to sell 110V version outside of their distribution chains, is it smart of the manufacture? I don’t think so as they don’t pocket the markup profits.

 

Maybe Eric should hire a good carpenter to make the speaker cabinets pretty, and looks like 10K, some of you may think they sound good by the look alone in the first place.

 

People do all that trash talk without hearing the brand or did not know how to use them (similar to hand tools, how many of you know adjustable wrench and saw are one way tools?) People should keep an open mind and give some respect to others’ work and efforts.

 

Best

 

Griffin