Music Maker II cartridge


I had the opportunity to audition the new Music Maker II cartridge, from The Cartridge Man - Len Gregory about 2 weeks ago. I used it in my system for about 20 hours. System is Teres 245/OL Silver(modded)/Shelter 501/Cotter Mk2/MFA Magus/Berning 45 SET ZOTL/Lowther Voigt Pipes.

I found this cartridge to be quite interesting. It is a MM type cartridge with a full MM output level, so it will work nicely in any phono stage. It has a higher compliance, so it will work best in medium mass or lighter tonearms best. It had a slight mismatch with my HiFi-modded OL Silver.

The basic design is a built on a blank Grado body, and all the guts are from the Cartridge Man. The construction and reliability/function were fine in my sample. Instructions were brief, but sufficient. No problems installing or setting up. It tracks at about 1.5 grams.

The sound of this cartridge varies from break-in fairly noticeably. The first impression is not what you will eventually get to after 20 hours. It improves nicely with a few hours on it. It has a full frequency response, and has good soundstage, imaging, and detail. Detail is not as fine or deep as the best MC cartridges, but quite good for MM. Sound is somewhat reminiscent of some of the better European cartridges.

The most interesting thing that I found about this cartridge is that it gives better performance than most high output cartridges, and has the full output level. I have noticed that many users of "high output MC cartridges" which have about 2mv output, have problems with not enough gain in their MM phono sections to properly play these cartridges. But also, the 2mv output is too high to plug into their MC phono stages, and so they fall "in-between" and may not give the best results in some systems like this.
This Music Maker II cartridge gives people a better option of having sound quality similar to the better high-output MC cartridges, but has enough output to use even in the weakest phono section. So a person who wants a good sounding cartridge, but doesn't have a specialized high gain phono stage, can get high-quality sound from the Music Maker II, and have an easy plug-in installation that will work with any phono stage. It betters the more well known MM cartridges easily.

So for the person who wants good analog sound with minimum fuss, and uses a built-in MM phono stage in their preamp that might not have much gain, then this cartridge is a perfect match for them. It matches well with most modern arms, especially unipivots, and gives better sound than many of the sub-$1k cartridges out there, including some MC types. It alleviates the need to spend additional money on a phono stage to handle a low output. So it could be a cost efficient way to get a good start in analog, because you save the price of that phono stage, and can just plug into your existing preamp phono section. A great idea for a person who has a full-function preamp and wants to get into analog.

This is not a cheap cartridge at over $900. It does not give "cheap" sound either. It gives very good sound, with the flexibility of use that I mentioned above.

Many of you may want to know if it bested my Shelter 501, and I would have to say no(IMO). But if I couldn't afford, or didn't want, an expensive step-up device, and needed to play a high output cartridge, I'd seriously consider this Music Maker II.

I'm always on the lookout for good ways to save money in a system. This would definitely be a better option than getting a $500 low output cartridge and buying a $500 phono stage or step-up device to go with it. As long as you have any MM phono input, you are good to go with this cartridge.

Of course, as with any cartridge, this Music Maker II will sound better in the better arms than it will in a cheap arm. At the price, it is not intended for a low budget system, but is aimed at a higher level system where the high output of MM is needed or desired.

One of the negatives I found, was the stylus protector cover. It was very secure, but it made me nervous taking it off and putting it on because it was kind of tight. But it sure as heck isn't going to fall off accidentally.

If you want to see a rave review of this cartridge, then go over to the 6moons audio review website, and they have a real nice review of it over there. Also you could go to the Cartridge Man website for information.
twl
TWL,

Thanks for your impressions of the MM II MM cart. I thought that Grados had the highest compliance but I was wrong when I looked at many of the Van den Hul & MM II cartridges! Cartridges from these 2 companies seem to follow the same philosophy of ULM tonearms that were the rage in the early 1980s. Most of the tonearms today appear to be too heavy for this cartridges & is a possible reason why I don't see too many people using the MM II cart. I think that it might have been an even better seller if the compliance was no more than 20um/mN.
here's another review of this cart.
http://www.tnt-audio.com/sorgenti/musicmaker_e.html
FWIW.
Seeing as how this thread popped up again, I'll give a follow up.

It has come to my attention that this cartridge is prone to giving the problems that Throwback has encountered with his JMW arm. The JMW appears to be a bit too heavy for this cartridge. My OL Silver was also a bit of a mismatch.

I'd recommend using a lighter arm with this cartridge, and it sounds like Soliver and the reviewers are getting nice results from the Hadcock and the MM2.
I've been using the mm3 in the oOL Encounter and have had constant problems on quiet passages with the fundamental resonance frequency of this combination.Either the arm mass is slightly too high at 14.5gr or the cartr. compliance is too high. Interesting thread.
Dear Twl: It is nice to read that like you there are several people that are testing/trying/running the MM/MI alternative .

I owned the MMII and heard the III and I find what you posted:

+++++ " This Music Maker II cartridge gives people a better option of having sound quality similar to the better high-output MC cartridges..."+++++

and that's why I sold it, its sound is nearest to the MC than to a fine top MM/MI cartridge.

Nothing wrong with the MC ( low or high output ) sound but the MM/MI " signature " sound IMHO is near the live music experience, more real, neutral, transparent, less distortion and more emotional.

Certainly in your opinion the MMII can't even your 501 but this fact does not means that other more " humble " ( very low price ) MM/MI can't do it because in fact they do/did it.

IMHO the MMII/III as good it is I think that is not the best example of the MM/MI alternative, this alternative is way better than that aand this opinion is not only my single " word " but several ones that you can read on the MM thread with owners of top ( not high output MCs. ) LOMC like the Ortofon Windfeld or Allaerts Finish Gold or ZYX Universe.

Through the last months I learn that if any one want to be and " feel " the live experience ( nearer ) in our home systems the MM/MI alternative is something to hear ( of course we have to know which cartridges has that " magic " at the top. ).

Your statement ( that I respect ): +++++ " Detail is not as fine or deep as the best MC cartridges, but quite good for MM. " +++++

is something that has " cure " with MM/MI cartridges through changes on load impedance ( just like in a LOMCs. ).
I can add that that " quite good for MM " is a little lightly comment because IMHO ( too ) the MM/MI alternative is really a lot better of what you already experienced on the MMII, I think that the MM/MI cartridges has nothing to envy from the MC ones ( just an opinion. )

Anyway, your experience is very enlighted and promote an " open mind " aspect taht we have to cultivate on almost any audio subject.

The MM/MI alternative was ( till few months ago ) an almost " lost audio link " for no know reasons but everyone ( like you ) that is trying now are discovering this very well " keep secret ".

Like Alunstylus say: interesting thread.

Regards and enjoy the music,
Raul.
This is a very smooth sounding cartridge but no better than my old Grado 8MZ and MCZ. Most frustrating are the plastic mounting lugs that deform with even a modicum of torque applied - IMO acceptable for cheap Grados but definitely not OK at this price level. You would think they could make them thicker for not much more money. Even entry level cartridges have better mounting arrangements; think Shure M97XE or Audio Technica ATF7 with their alloy mounting brackets.