Lightspeed Attenuator - Best Preamp Ever?


The question is a bit rhetorical. No preamp is the best ever, and much depends on system context. I am starting this thread beacuase there is a lot of info on this preamp in a Music First Audio Passive...thread, an Slagle AVC Modules...thread and wanted to be sure that information on this amazing product did not get lost in those threads.

I suspect that many folks may give this preamp a try at $450, direct from Australia, so I thought it would be good for current owners and future owners to have a place to describe their experience with this preamp.

It is a passive preamp that uses light LEDs, rather than mechanical contacts, to alter resistance and thereby attenuation of the source signal. It has been extremely hot in the DIY community, since the maker of this preamp provided gernerously provided information on how to make one. The trick is that while there are few parts, getting it done right, the matching of the parts is time consuming and tricky, and to boot, most of use would solder our fingers together if we tried. At $450, don't bother. It is cased in a small chassis that is fully shielded alloy, it gets it's RF sink earth via the interconnects. Vibration doesn't come into it as there is nothing to get vibrated as it's passive, even the active led's are immune as they are gas element, no filaments. The feet I attach are soft silicon/sorbethane compound anyway just in case.

This is not audio jewelry with bling, but solidly made and there is little room (if any) for audionervosa or tweaking.

So is this the best preamp ever? It might be if you have a single source (though you could use a switch box), your source is 2v or higher, your IC from pre-amp to amp is less than 2m to keep capaitance low, your amp is 5kohm input or higher (most any tube amp), and your amp is relatively sensitive (1v input sensitivity or lower v would be just right). In other words, within a passive friendly system (you do have to give this some thought), this is the finest passive preamp I have ever heard, and I have has many ranging form resistor-based to TVCs and AVCs.

In my system, with my equipment, I think it is the best I have heard passive or active, but I lean towards prefering preamp neutrality and transparency, without loosing musicality, dynamics, or the handling of low bass and highs.

If you own one, what are your impressions versus anything you have heard?

Is it the best ever? I suspect for some it may be, and to say that for a $450 product makes it stupidgood.
pubul57
$59.00 US dollars to my door.
$15.00 of which is shipping.
I used Paypal so a little extra charge on my final bill.

Isn't this hobby all about improvement?
That's why I ordered the unit,hoping it will improve the sound of the LSA.

I am pretty sure it will do something,comparing this to the wallwart I was using is like comparing a model T to a modern Bugatti.

The power supply improvement is not denoting a flaw in the LSA.

The owner has to provide his own PSU for the LSA unit,and a 10 to 20 dollar walwart will work,like I said.
THis robust little beast hopefully will unlock the full potential of the LSA.

If adding a little salt to the soup makes for a better meal than I am willing to go that route.
Nothing in this hobby is perfect.
Everything can be made to sound better or worse than it is.
Doesn't matter who built it, where it's built or for how much it cost to build it.
Please,just allow me the option to try to make an improvement.

Thankfully the LSA allows one to experiement with PSU, and doesn't tie you into what one fellow feels is the only way to go.
Lacee,
Please let us know your impression of the new power supply with the LSA when you receive it.
The LSA arrived a few days ago. I had high hopes, as it appeared that my new DAC (Lampizator L4 with USB and native DSD) sounded strained with my (modified) Cayin A-88T integrated amp. The problem appeared to be the incompatibilty (soundwise) with the its preamp. I found this out by taking a flac file, reducing its volume using Adobe Audition, and playing the low-volume file directly from the DAC to the Cayin power stage. Everything resolved, everything opened up!

Now with the LSA it sounds just like that: open, musical, detailed and non-fatiguing, but with the added benefit of a volume control. It does not only sound good, but also feels good, knowing that the LSA does not mess with the signal...

A wonderful addition to my sound world...
And doing business with George was a pleasure!

Dennis
I use a SB Touch digital out to DAC only for internet radio. I could not believe the improvement after replacing the Touch noisy SPS with a LPS. It appears SPS is adding noise even when not in used. Removing it from the system was one of the best inexpensive tweaks.
I'll post my impressions.

First impressions, and then after a few days of play.