Lightspeed Attenuator - Best Preamp Ever?


The question is a bit rhetorical. No preamp is the best ever, and much depends on system context. I am starting this thread beacuase there is a lot of info on this preamp in a Music First Audio Passive...thread, an Slagle AVC Modules...thread and wanted to be sure that information on this amazing product did not get lost in those threads.

I suspect that many folks may give this preamp a try at $450, direct from Australia, so I thought it would be good for current owners and future owners to have a place to describe their experience with this preamp.

It is a passive preamp that uses light LEDs, rather than mechanical contacts, to alter resistance and thereby attenuation of the source signal. It has been extremely hot in the DIY community, since the maker of this preamp provided gernerously provided information on how to make one. The trick is that while there are few parts, getting it done right, the matching of the parts is time consuming and tricky, and to boot, most of use would solder our fingers together if we tried. At $450, don't bother. It is cased in a small chassis that is fully shielded alloy, it gets it's RF sink earth via the interconnects. Vibration doesn't come into it as there is nothing to get vibrated as it's passive, even the active led's are immune as they are gas element, no filaments. The feet I attach are soft silicon/sorbethane compound anyway just in case.

This is not audio jewelry with bling, but solidly made and there is little room (if any) for audionervosa or tweaking.

So is this the best preamp ever? It might be if you have a single source (though you could use a switch box), your source is 2v or higher, your IC from pre-amp to amp is less than 2m to keep capaitance low, your amp is 5kohm input or higher (most any tube amp), and your amp is relatively sensitive (1v input sensitivity or lower v would be just right). In other words, within a passive friendly system (you do have to give this some thought), this is the finest passive preamp I have ever heard, and I have has many ranging form resistor-based to TVCs and AVCs.

In my system, with my equipment, I think it is the best I have heard passive or active, but I lean towards prefering preamp neutrality and transparency, without loosing musicality, dynamics, or the handling of low bass and highs.

If you own one, what are your impressions versus anything you have heard?

Is it the best ever? I suspect for some it may be, and to say that for a $450 product makes it stupidgood.
pubul57

"Just make sure with the seller, that it has a 2.1mm plug, and that centre is positive..."

--or--

If you already have the TeraDak, use the 2.1mm plug from it.

If anyone gets the rechargeable Li-Ion battery pack, I'd be interested to know what difference/s you guys hear with it if you can post it up.
  
As It's getting harder and harder to find linear mains adaptors (smp's "switch modes" are taking over) and they make more noise.

 I could be forced one day to supply these li-ion batteries with the Lightspeed instead of the linear supply.

Cheers George    
Hi clio09, I've purchased two U9 Teradak power supplies from the same seller and link you posted.  They both work great with the two Lightspeeds that I've recently acquired.

Just found a new cheap well made linear 12vdc power supply for you guys to power your Lightspeed Attenuators with. just make sure you tell him the mains voltage in your country.

It’s $58aud, this equates to around $45usd. It has the right voltage 12vdc has plenty of current, has the right size 2.1mm plug centre possitive and looks to be well made, with a sexy digital readout of the voltage.

https://www.ebay.com.au/itm/HIFI-25W-linear-Power-supply-with-display-DC12V-LPS-for-Preamp-DAC-PSU-upgrades/142523458535?hash=item212f0f63e7:g:GZAAAOSwjMdZz5HC

Cheers George
Anyone who wants a used late model Lightspeed Attenuator, one has popped up very cheap here for $250aud which equates to $196usd and I know it only costs around $40 post to send as I send heaps to the US.

https://www.stereo.net.au/forums/topic/241338-lightspeed-passive-attenuator/

Cheers George