Kiseki, Supex on a present day tone arm?
A few cartridges have caught my attention, first off all the Goldring Eroica H; but also a bit more exotic elements like the Supex SD-901 & the Kiseki Mission 773.
Does anybody know if the Kiseki and Supex elements can be mounted on any current tone arm like Rega, SME and Clearaudio?
- ...
- 12 posts total
@genghis6400 , Congratulation; Kiseki Gold spot is the latest and the best Kiseki. Recognizable on the 5 screw threads on both sides and gold spot on its front side. The ''modern stock'' is a fake Gold spot. Actually the Blue which was the first version of the LOMC Kiseki. I own 5 Kiseki's 3 of them the Gold spot. I hope you wrote to Durob in Holland because there is no such thing as an address for Kiseki. What you need is the distance between the spindle and the pivot. Aka the ''effective length'' for the stylus. By moving the cart on its headshel you can adjust this length easily. |
@genghis6400 , ''Durob audio'' is an HIFI shop in Holland also owned by Van den Dungen (www.durob.nl) . I assume that Van den Dungen ordered ''his'' Kiseki gold arm as match for his Kiseki Blue series cartridges. Interesting to see that you ask questions about Kiseki's but use FR-64s with KGS. I can't blame you because I use my FR-64 S with all my carts (grin) |
Hello @nandric So I got a reply from Van Den Dungen with the specs of the Kiseki Gold tonearm. Effective Length is 229 mm and an Offset Angle of 24.1 degree. After checking with VE calculator it came out that P2S is set at 211 mm with overhang of 18 mm. This the same specs as Audioquest Tonearms. Yahoooooo!!! |
- 12 posts total