2. amps-preamps
  3. 1171701564

Kharma Matrix MP 150 issues???

May anyone know the issues?
I'm having a small issue with my kharma system and wondering if you can help? I will try to expain the best i can due to my poor english. First, when i turn the system on and play for 10-15 mins. I hear a LOUD POP sound out of my right channel speaker. Than, i know right away my right Matrix 150 right side amp LED light turned off. I ran over there quick and turn the power off first. Than, i check the fuse box and the fuse was ok. This don't happen too offen, but now i am very worry it might pop again when turn back on. So, it did pop again after i turned back on for 5mins.

I am guessing it could be a cable connection was shorted? Just guessing? My friend is saying it could be a DC problem? which i don't really know what that means? or, it could be a simple issue that i don't even know how to fix? So, i decide to email for help. Will you kindly and help me resolve my issue? I'll be very happy to provide more detail if needed.

I hope i'm lucky and get it fix soon. I will be patience and wait for your respond. Many thanks to the person reading this.

My setup:
Kharma CRM 3.2 speaker
Kharma 1.0 subwoofer
Kharma Matrix Mp-150 Class D mono amp
Conrad johnson ART dual mono preamp. Just re-tubed nos with Telefunken
Conrad johnson premier phono amp
Marantz SA-11 cdp
Oracle Mk V turntable
Nordost Heimdall compete cables including speaker
Cryo audio technolgy compete power cord
jimbox
jimbox OP
5 posts
 
Hi Mikelavigne,
The left channel is working fine. The right channel did have a little sound before i swap the tubes up and down. However, after swaping them, no sound is coming out from the right channel. I assume the ART right channel has a problem? I will try and hook up with my suround speakers and give it a one more try. If still no luck, i will take your advice and conrad johnson monday and expain the whole story to them. I just hope is a simple issue like you said. I am so glad you came on board and help out. Many Thanks!

May i ask you another quesiton regarding a CD player opinion? I am planning on getting a used CDP or Transport and DAC combo. I understand everyone have different preference and taste. You seem to use alot of TOP gear in the past and it would be great to ask you for advice. My budget is around 7 grand. I have a few brand and model listed down below. I'm also open on opinion as well if you recommended.

1. Reimyo CDP-777
2. April music Eximus T1/DP1
3. Emm labs DAC6e/CDSD non-se
4. ??
mikelavigne
2,194 posts
 
Jimbox; you are welcome. sorry you have a problem.

do you like the tonal character of the CJ Premier phono stage? particularly compared to the Marantz SA11? the CJ has a warmth that is very nice if not strictly neutral.....and it comes at the expense of micro-dynamics, transparency and ultimate clarity.

my taste runs toward the vivid clarity of the EMM Labs gear. which, while very natural, does not add warmth at all. the Reimyo (which i've had in my system) is a bit warm but not too much. the EMM 'SE' DAC6 is the very best digital i have heard when combined with the CDSD with the USB port (which is the same as SE whether or not badged that way). i don't know the April music.

there are lots of very good digital systems.....and i have not heard all of them. it comes down to your reference. i use the vdH Colibri cartridge on my Rockport tt as my reference of how reproduced music should sound; the EMM Labs gear comes closest to that to my ears.

there is a new 'one-box' EMM Labs digital player that i think is very very good at under $10k list price. you might consider that.

i hope this is of some help.
jimbox OP
5 posts
 
Hi Mikelavigne,
I only have two years of experience on audio. My first high end gear was the older Cj classic gears. I was never willing to try others at the time when i thought Cj was one of the best out there IMO. I am very happy with the way the ART sounds. It just sounds right! It looks like i have to narrow down to either Emm labs or Reimyo?
clark_h's avatar
clark_h
1 posts
 
Hello from Canada. The Kharma Matrix MP 150 amps have a switchable DC buffer that is installed but not switched on. The amp sounds better with it switched off but some tube preamps will leak DC and stress the amp. If You fix the CJ preamp and the problem still occurs try turning on the DC buffer. I have the Nola Viper Reference speakers and am considering buying the Kharma amps to tighten up the bottom end a little. My Bel Canto EVO2i needs better grip. Looking for a good CD Player? Try the Meridian 808
or if Your CJ pre is dead then kill two birds with one stone and consider the Aurum CD/Preamp. All the best, Clark.
jimbox OP
5 posts
 
Hi Clark_h,
If you say there is a switchable DC buffer inside. How come Bill at GTT Group said; He can ad $50 service fee + shipping to engage the dc protection circuit in my amp?? Is there something i should know, but didn't know of? I call Cj and left them a message today. I hope i will hear from them soon. I wonder what the problem is on my ART? The lower chassis right channel tubes does not light up? I check the tubes with my tester. They work fine. I just hope is just is not a big problem or i can just go and hang myself. J/K

Thanks for the input. BTW, where is the switch located? Inside? I will look in to the 808 CDP. I want to thank you for letting me know something that i should have know of. I apprecitated! Jim
More to discover