Dear Baam23f: The Mhalers are very good/clever thinking design and that's why they choose to lower the normal IMD/HD, that exist on almost other speaker designs , crossing from midrange to the low drivers around 70-80hz and this is exactly what I'm talking about.
Now, you choose too a very well matched amplifier ( bryston ) because the Mhalers goes down near 2 Ohms in the low bass and the Bryston has a very low output impedance and the power to handle easy.
+++++ " I believe that if the mains are made with quality it's an overkill to cut them out, especially in my case.." +++++
I agree with you.
+++++ " I will buy a stentor, and then I'll try to integrate the two " +++++
I like and respect your wide " open mind " on the subject. Which are my thoughts here?:
well, IMHO the integration of two subs in full stereo fashion ( by-passing the Mhaler low drivers. ) in your system could help ( maybe ) not only to go deeper on the low bass but more important than that could be two things ( between other less important ones ) : leave the Bryston free of work in the 70-80hz/down frequency range and in this manner is probable that the Bryston improve its quality performance in the main remaining frequency range.
The second thing is that because the low mid-bass/low bass frequency range will be handled by two subwoofers where its drivers were specific designed for that range ( same as Mhalers but these ones goes to 30hz -5db and -10db at 22hz and we don't know with which distortions level. ) and where those drivers are paired with amplifiers that match exactly the subwoofers parameters: frequency response, electrical impedance, damping, power, distortions, etc., it could be that you could have a quality improvement.
Like you say: " We will see ".
Regards and enjoy the music.
Raul.
Now, you choose too a very well matched amplifier ( bryston ) because the Mhalers goes down near 2 Ohms in the low bass and the Bryston has a very low output impedance and the power to handle easy.
+++++ " I believe that if the mains are made with quality it's an overkill to cut them out, especially in my case.." +++++
I agree with you.
+++++ " I will buy a stentor, and then I'll try to integrate the two " +++++
I like and respect your wide " open mind " on the subject. Which are my thoughts here?:
well, IMHO the integration of two subs in full stereo fashion ( by-passing the Mhaler low drivers. ) in your system could help ( maybe ) not only to go deeper on the low bass but more important than that could be two things ( between other less important ones ) : leave the Bryston free of work in the 70-80hz/down frequency range and in this manner is probable that the Bryston improve its quality performance in the main remaining frequency range.
The second thing is that because the low mid-bass/low bass frequency range will be handled by two subwoofers where its drivers were specific designed for that range ( same as Mhalers but these ones goes to 30hz -5db and -10db at 22hz and we don't know with which distortions level. ) and where those drivers are paired with amplifiers that match exactly the subwoofers parameters: frequency response, electrical impedance, damping, power, distortions, etc., it could be that you could have a quality improvement.
Like you say: " We will see ".
Regards and enjoy the music.
Raul.