2. analog
  3. 1162812543

How to best isolate TT from vibration?

Hi all:

I'm currently using a Systemdek IIX table, which has a floating suspension system. I have it on a Atlantis Reference rack, but have replaced the top shelf with a 18" x 18" x 2" brick paver, and use (8) Vibrapod 4's under the table itself to prevent vibration. I still suffer from some skipping unless I walk ever so softly in my music room, most noticably at the beginning of an LP. I'm looking for input regarding what you fine members consider to be the best, but yet economical, methods of isolating this table and nixing this problem. Thanks,

Jim
musicseller
mikelavigne
2,199 posts
 
if you have a 'flexible floor' and the tt is on a rack on that floor, you will not be able to eliminate the 'foot-fall' problem.....no matter what you do.....so you will have to live with that issue.

OTOH you can eliminate the other vibration causing problems (both air-born and floor music feedback as well as earth tremors) by using the same product electron microscopes use to eliminate vibrations......the Halcyonics vibration table. it makes all other vibration control systems look like toys.

unfortunately it costs around $8k.....but it does the job.

i have tried it. it is.......

the real deal
inpepinnovations1e75
395 posts
 
Try hanging it from the ceiling. I have and it works great.

Bob P.
quickk9
2 posts
 
I had this problem when I lived in an apartment in college and got my Linn. Linn recommended a Sound Organization table - light and rigid. (Being light and rigid, the natural frequency of the table is high and it is less prone to footfall.) Since I couldn't afford one at the time, Linn recommended a parsons table (sp?). These are those old low, square plastic tables with the four square legs that just push into the table. Many people used them outdoors. I finally got hold of one of them and the footfall problems were history. More recently, I have also heard that the Ikea Lack side table is now recommended by Linn and it costs $12. Since then, I managed to buy SO table and it works great..
david12
1,454 posts
 
I agree with wall mounting and also into a solid wall, preferably outside wall. I put mine in a partition wall, of necessity and the tonearm dances around when you walk past doh!!. Its still better than on a quality hifi rack, just choose your wall better than I did
quickk9
2 posts
 
Since I suggested it, I tried the Ikea Lack side table with my AR turntable last night - similar three point suspension to a Linn. I have hardwood floors not carpeting, but I took some heavy steps in the room last night and the turntable tracked fine. The table was only $12.99 but the shipping was around $20, so if you have an Ikea near you it would be worth the drive. I have the table in dark brown and although it is cheaply made, it doesn't look too bad especially with a turntable on top.
More to discover