How Important is Dynamic Headroom?


I recently bought a B&K Reference 200.2. I liked how it sounded at the store, and, in regard to specs, I was impressed with its high damping factor (450). Also, it has 225 wpc into 8 ohms (375 wpc into 4 ohms). Hence, everything seemed fine.

I read the owner's manual, and it lists the unit's dynamic headroom as 1.2 db. I did a brief search of other similarly priced units, and 1.2 db would seem to be about average (or perhaps on the low side?). Anyway, how significant is this?

Thanks.
gtortorella
See this thread. The bottom line: Dynamic headroom is a spec that is inconsistently defined and misleading. I would therefore suggest ignoring it.

Also, re your mention of damping factor, extremely high damping factors are meaningless, because the damping factor as seen from the woofer's perspective will be limited by the resistance of the speaker cables and the crossover inductor. And most or all speakers don't need extremely high damping factors anyway. See this thread.

Best regards,
-- Al
I thank all for the responses. My preamp is scheduled to arrive on Wednesday. I cannot listen to the big B&K until the preamp is delivered (I have no other preamp). I put quite a bit of thought into the changes I have made in my system, and I am thinking it should be my best yet...

Unison Research Unico CDP-->Canary Audio CA-200-->B&K Reference 200.2-->Ascend Acoustics Sierra-1

I also have a pair of Opera Mezza loudspeakers. Comparing them to the Sierra-1s should be interesting. I have two sets of interconnects: Enigma Audio Apex and the Anti-ICs (by Paul Speltz). My speaker cable is also by Enigma Audio.
I am also considering trying tubes in front of the B&K. The preamp I have picked out for this purpose is the Quicksilver Line Stage (non-remote version). My only concern is the issue of having too much gain. In fact, I will post another thread on this matter.