How do I build the best room


Yippee, I now have a partially unfinished basement with space for "The Room", and a wife who says I really should build one. I am hoping for some direction to some good online info on ideas for room design. I have reviewed the simple math on resonances and standing waves but sould like to obtain new ideas on mitigating the same. We are hoping to use room design/ shape in order to minimize required surface treatments. Approximate room dimensions are 8'H-15'W-19'D
Kevin
System- Dac1, Classe amplicication, Thiel CS5i and Magnepan MG20.1. (Speaker purchase has yet to be made)
be20
Per Peter's input, IMHO the room size you are proposing may be too small for Maggie 20.1's. I listened over a few visits and various permutations of room treatments, mods and amplification while Peter did everything he described to make them work in his room. They sounded superb overall, yet they always felt like they needed more room to breath. The soundstage could never really open up in that space so the illusion was lacking in that way. It was there in spades in other ways. I'm sure they are capable of more, but I believe the room size was the real limiting factor there.
Let a professional do it. I have heard of companies that build studio's sometimes also do this kind of procjects. The have the experience and gear to do it. They have electronics that can map/determine the sonic behavior of your room. What frequencies needs to be damped. How much and with what delay you have echo etc etc.

Als I think it would be better to use a solid building material, bricks or concrete. I am not a fan of wooden houses.
Kevin, my new basement listening room is 8x15x19, so I may be able to offer some advice. Re standing waves, the room height vs room width may be the main issue. If any part of your ceiling dips below the 8' level (or if your floor is elevated anywhere), that will exacerbate problems in the 60-90 Hz area. But a combination of bass traps and digital EQ helps enormously. I am using five Corner MondoTraps from RealTraps and couldn't believe the improvement once I got them put in. That, plus judicious use of the notch filter in my Anthem AVM20 for movie material. You may indeed be able to utilize built-in DIY fiberglass for the direct reflections, but bass traps commonly need some airspace to do their work (i.e., place them in room corners).

Be careful about speaker size and type. If I had it to do over, I would swap out my von Schweikert VR-4jr's for high-end, stand-mounted monitors (maybe like Usher BE-718s) and a (good) sub or two. The VS's are too big for my space--they too easily over-excite the room. Also, I presume you have a cement floor; this will be difficult to spike floorstanders to--will really trash the sound. I am spiking the VS's to hardwood platforms that rest on the carpet, but this is probably not a final solution.

I am not sure what to make of the suggestion to put the speakers along the long wall of the room. You may want to try both the long and short wall; my hunch is that short-wall placement will give you more "wiggle room" in terms of trying different speaker placements.

General rule of thumb is to put some acoustic absorptive material behind the speakers, and acoustic diffusors behind your listening chair(s). The Echo Busters and RealTraps Websites have good diagrams and advice on this.
Kevin: I built my room in the basement also. The biggest problem I am having is eliminating the upstair noise. Footsteps being the biggest problem. So far have disconnected the ceiling from the floor truss and put in ceiling joist. Not even the walls are touching the floor truss now.Used 4 inches of rigid mineral wool for insulation. In the process of laminating 2 layers of half inch mdf with green glue inbetween and half inch of quiet rock with green glue inbetween it and the mdf. I had a drop ceiling and will be putting that back in with 1 pound psf mass loaded vinyl on top of the tiles. The channels will be treated with silicone where necasary so they will be quiet. Perhaps your situation is different but for me the upatairs noise was more than I could handle. Plus to much of the music was getting upstairs in my opinion. I read a lot on soundproofing. There are 4 things: number 1 mass , 2 isolation, 3 damping, 4 absorption. My room is 14 by 20 by 8. Treatments are some absorption on long wall and 21 inch diamiter 1.5 thick inch pipe insulation for bass traps about 12 inches out from rear cornor.Big pipe insulation. The room is fantastic sonically hopefully it will be quite enough in a couple of months. Hope this helps and hope your room works well for you. Jeff
The room is a little on the smaller side for the 20.1, but we did (successfully) put a pair in a 13.5 x 18 x 7.75 room. The planars don't have a lot of energy dispersed towards the ceiling and they don't have a lot of bass, so they can actually work reasonably well in a smaller room. However, at this size the engineering is difficult. The smaller the room the more attention needs to be paid to room modes, diffusion, reverberation times. Small rooms are very unforgiving to design flaws--but it can be done.