Help with NEW MC cartridge putchase


I am certain that this question has come up before, but here it goes again. I would like to purchase a good quality MC cartridge to go with my tube phono stage (40 db of gain). The rest of my equipment are all based on tubes and I use SET amps. I currently am using the ClearAudio Aurum Beta S model, which is a MM cartridge. But I want to experience-- hopefully towards a positive direction--the sound of the MC cartridge. I am not looking for anything that costs an arm and a leg. No more than $750. If you have any suggestions, I would really appreciate it. Thank you
kasboot
40 db just isn't quite enough. its borderline for a mc cartridge. you will need one at 2.0 or higher. best to spend a few more dollars and upgrade phono stage.you could get a step up transformer as well.
It is unbelievable that no mention is made by the asker or any of the posters as to what type of turntable and tonearm he has. How can anyone ask for a cartridge recommendation or make a recommendation without knowing this information? Or does everyone know this guy and what his rig is?
Twl,

Are you really believe there is a big difference between two tonarm (e. g.: audioquest PT5.0 vs VPI's JMW) or
two turnable ( e.g. VPI MK3 vs TNT)? I know they have a big difference on price but not able to distinguish sound after playing a few same LP with same MC. Is there anyway that people like me will able to identify these music difference on tonearm or turnable?
I thought if you get a very good MC then you will get great sound. That is my personal opinion. Am I wrong? Please let me know.

Best regards.

Jeff
Jeff, some people can hear the differences and some can't. If you are comparing two very high quality items, there are probably minor differences between them. Virtually every piece of a system has its own sonic signature. But, there are some things that are fundamental. A tonearm must be rigidly fixed to the (sub)chassis of the turntable and have excellent rigidity and close tolerance bearings if it is going to allow the cartridge to retrieve the information properly from the record. If not, when the stylus traces the groove, some of the vibrations that were intended to move the stylus will be lost in the play of the bearings in the tonearm. Also, any play in the bearing of the spindle/platter assy. will have the same result. The order of importance in a record playback system is: Drive sytem, then tonearm, then cartridge. This is particularly critical when choosing a low compliance MC cartridge. Since the suspension of the cartridge is stiff, more energy is transferred to the tonearm and bearings. If the arm is not up to this task, it will lose some of the music. The cartridge cannot make up for this deficiency in the arm, no matter how good the cartridge is. So, applying a high priced cartridge to an inferior tonearm will not yield the performance improvement that you paid for. This is one reason why the tonearm/cartridge matchup is so important. Another is mass/resonance characteristics. But, again, if you put the best arm/cartridge combination in the world on a Rega 2, it will not sound as good as a Linn LP12 with medium priced tonearm/cartridge. This is because the turntable drive system is more important than the arm/cartridge, and the LP12 has a better bearing and suspension than a Rega 2. What is lost in the inferior bearing of the turntable can never be recovered by the arm/cartridge. This is why they make high end turntables. But if you can't hear the difference between two good tables then I wouldn't recommend spending any additional money on the more expensive one. There are some times when a more expensive item does not perform as well as one that costs a little less. You should trust your ears. But, your ears will develop a more sensitive capability when you are exposed regularly to very good gear. Then you may hear more differences than you did before.
Jeff Wu- Yes, with two tone arms of different designs, compliance can be a concern. Different combinations can resonate and cause trackability problems. A high compliance cartridge on a low mass arm is essentially the "tail wagging the dog", or, in other words, the cartridge will control the movement of the arm rather than the arm controlling the cartridge to stay stationary (laterally) and tracking the groove. (This is overly simplistic and I hope the high/low compliance terms are correct- I keep forgetting which is which.)

Generally speaking, most arms are medium mass and most cartridges are medium compliance, but you'll want to check before spending alot of dough only to find that you have compliance issues.

Regards
Jim