HELP WITH A PREAMP DECISION


Sometimes one just needs to make an upgrade for reasons that are purely emotional. The system is Krell 402e, Veloce LS-1, Esoteric K-01, Revel Salon2, Stealth Indra IC cables, Siltech LS-100 speaker cables.

Just lately for no apparent reason the system sounds a bit harder than it used to. I believe that one's perception of a system changes over time.

I am considering exploring either new or different tubes for the Veloce. But would anyone care to recommend a new preamp for me. Before the Veloce I had a BAT Rex pre and it sounded great, but the Veloce sounded better after a long term audition period of several weeks.

But I am up for a change. . . .recommendations most appreciated.
huntermusic

Hi Huntermusic, your Esoteric K-01 has a very nice low 47ohm output impedance and your Krell has an equally very nice 100kohm input impedance. Perfect recipe for a passive preamp.

You should for peanuts ($49) try out this cheap one first and see what you think, then if you like what you hear and want some thing more esoteric, keep in touch.

http://schiit.com/products/sys

Cheers George

Go with what Jwpstayman told you...Those two items should be checked FIRST by doing BOTH at the same time!

I have a feeling all other suggestions, though admirable, will not be necessary.

Good luck!
Have you though about Aesthetix? I have heard them a few times and they always impressed
The Veloce is a fantastic-sounding pre-amp. Very hard to top preamps like that or Esoteric C-02 or C-02X (both worth a look if you are hunting an alternative) or Ypsilon,.....but like others have said, look at the rest of your system as well to ensure you are not overlooking another key upgrade.
Thanks for all the advice. I guess it is time to do some listening to new equipment. I do not buy any new gear without auditioning the piece at home in my system. Some dealers do not do that. Too bad for them. The system sounds terrific. My listening room is 18' x 18' w a 10 ft. ceiling and extremely well damped--It is my library. I forgot to mention that I also use an HRS system for the shelving and amp stand. This single addition to the system made a bigger difference in sound quality than any piece of gear I have added to the system. For a variety of reasons I cannot move the gear around. I am considering a speaker cable upgrade but at the present time I am running 9 meters of cable under the floor to the speakers. It is an expensive proposition. Moving the amp and using longer IC cables would require some work by my contractor to modify some cabinetry. I am not eager to do this.

The amp is on its own dedicated 30 amp line, and the rest of the equipment is on two dedicated 20 amp lines. I got rid of the power conditioner about two years ago; it added a layer of its own to the sound. It became very clear after I added the HRS system to the equipment.

Frankly I think that the hardness I detect may just be from the last batch of CDs and SACDs I ordered from Elusive Disc. As you all know all CDs and SACDs sound different.Many of the recordings that I listen to sound fantastic. And let's face it, we all go through periods where one's system doesn't sound as good as one remembers---and then, voila, it sounds fantastic again.

By the way, the speakers never sound bright or hard, it is usually apparent on specific recordings.

I think the first order of business, the easiest, and the cheapest is to check the tubes in the Veloce, and try new tubes or other tubes. I can only guess at the hours on the tubes now but I would say 1000 hours, maybe 1500 tops.

Any more thoughts are appreciated.