Hafler 9130 power amp

Here is a picture of the power switch. The retainers are on the top and bottom as the switch sits vertical in the faceplate.

http://livedoor.blogimg.jp/taken81/imgs/6/b/6b8faaba.jpg

http://livedoor.blogimg.jp/taken81/imgs/5/7/57eb6f12.jpg

You're welcome, hooznwif.   Nice pics/details, mofi!

Thanks for the fantastic pics Mofimadness.  I printed them out and will perform the install today. Both you and rodman99999 are the best!!!  

I just removed the top cover of the amp and immediately noticed that the two white wires that attach to the left and right front panel output controls in mofi's second pix are totally missing. Does this mean that I am not getting full output?  

No- those would be gain/input level controls, without which you will get full input level(no attenuation), assuming the pots were simply bypassed. You should find wiring, from the input RCAs to the circuit board. One connection close to a 2.2uF cap and another to a ground point(which may also be on the circuit board, or the Stereo/Mono switch), for both the L & R inputs, of course. If I had a professional amp, that I intended to use for home audio, bypassing those would be my first tweak. See page 8, for info on the gain controls: http://www.hafler.com/pdf/archive/9130_amp_man.pdf