ESS speakers "Translinear" Transstatic


These were speakers designed by California based company called ESS, that is, Electro Static Sound before they used the Heil Air Montion transformer. These models were current in 1970-1975. I am curious if any one still owns either of the above models, or has seem them listed on any of them listed in the used audio web sites. They were incredible speakers for their time,and sounded as good as many of so-called elctrostatics of today. They used good driver elements, for example, the KEF B-139 oval driver for the bass response.If anyone has knowledge of either of these above vintage speakers,please leave info on this Web page. Thank you!!
sunnyjim
I currently own a pair of ESS Eclipse B102 studio monitors.
I would love to get some infos about them because they were heavily modified and I would like to see them in their original state.
My speakers came with a completly new enclosure in walnut finish. The old cones and the passive radiators have been replaced and the speakers were recabled. There were also new cable posts added and the speakers and the bases got nice spikes and a partial sand filling.
To Gary dated 01/14/07. The best thing you can do with the AMT-1 is too ditch the woofer and visit your local Car Stereo driver dealer and buy the best 4 ohm Sub bass driver that he stocks ( not neccesarily the most expensive . Cast chassis, not too tight a suspension ( VERY IMPORTANT )and about 89- 92 db per watt efficiency should do the trick. I myself have chosen a 10 in Kevlar type driver with a huge magnet assembly, cast chassis and have also done the capacitors up with all polyprops used and rewire as well. The bass driver preferably will have a lightweight cone ie Polyprop, Carbon fibre or kevlar as it needs to ba able to respond to about 1200 Hz to intergrate with the treble unit. As the crossover and efficency levels and the treble unit is originally a 4 ohn load a car sub driver is actually a great choice - just ignore the horrible paint and bling of the car sub drivers. Stay away from pressed steel chassis as well. Mine are fantastically inproved with the new driver.
George,
I have a pair of ESS AMT bookshelf speakers. Do you have or know how to get the specifications of the 12 inch woofers. I want to replace them.
I would like to hear what anyone has to say about this comment!! -- My Dad gave me a pair (of broke down Cabinets) of ESS Performance Series (Model 5) Heil Air Motion Transformer Loudspeakers... They sounded horrible, but me just being a kid, they gave me something to tinker with. For the specifications number: Each ESS cabinet consists of: one 5" tweeter, one 10" woofer, one 10" passive radiator at upper half of cabinet on the back[(flat-disk style)(rear firing.) and a snap on dark cloth-coverd grille with the small aluminum ESS name plate on bottom right-hand corner... On the inside of the Cabinets: Acoustic Baffling and a Crossover Panel. Crossover Panel used to provide overload protection and frequency ratio for the 5" Tweeter. The Cabinets still have a black front and back, but the sticky back vinyl "wood grain" covering for the top, bottom and sides has fallen off, (finally some 8 years ago)... So to get back to my story, Both of these ESS Loudspeakers were stored in my Dads moisture air filled garage, thus leading to all the foam surrounds on the woofers and passive radiators to become non-existent over time as well as the faux wood grain de-adhering from the Cabinets... So to make a long story short , I purchased new OME 10" woofers (with rubber surround this time) with same 125 watts RMS and purchased new OME replacement passive radiators (which means I'll have to rubber cement them to the existing octagon shaped aluminum frame on the back of the cabinet which holds the diaphragm into place)...with a couple coats of semi-gloss black spray paint to touch up the bare looking 3/8" Heavy Compressed (High Fidelity Grade) Particle Board (Pre MDF technology era ), not only will these Loudspeakers look good, but they will rock the house, just like they did in the 80's...these speakers will perform optimally when placed 45 degrees in the corners of a room...the bass from the passive radiator reflecting out from the corner and woofer firing at front, what an outstanding combination for low,low bass ...Now some trivia questions that I would like answers to: What year did the ESS Performance Series (Model 5) come out? How much money did a pair of these speakers cost when they first hit the shelves? Was ESS top-of-the-line for its time? Why did ESS shut down (go out of business)-(in Southern California?) Thank for for you interest in ESS Vintage AUDIO as much as I am -- Dave
"Sound As Clear As Light" was their slogan. I own a numerically matched pair of Rosewood units purchased as floor models from a Tacoma, WA in 1972. dealer. I got them from a friend who originally purchased them from Paulsens, then sold them to me for $600/pr. He decided to go with K-horns, so I became a proud recipient of the ESS Transtatic Is. I have replaced 4 of the original RtR es wafers. They are glued and riveted making them difficult to repair - My stereo guy is giving it a try. I purchased 8 replacement units on Ebay for $250 (1 bad one) from Infinity 2000A speakers. I will pass these ESS down to my offspring because they are truly wonderful in sound quality and quantity, and they are pleasing to the eye. I also have the instruction manual and sales brochure.