Your poor amp appears to be flat-lining! Emergency services of a qualified tech are required!
Ecler amplifier based on Hypex UCD400 - Fault/Request for help!
Hello everyone apologies that my first post is a call for help!
I have an Ecler NZA4-400 amplifier that uses 4x Hypex UCD400 Class D Modules. The amplifier powers on fine and I can see input signals at good levels in the Eclernet software that you can manage the amp with.
The problem is there seems to be no gain in the amplifier( If I turn the volume control right up I can barely hear the output and it measures at less than 0.1V with a DMM.
Anybody had any experience of this before or any ideas what might be wrong?
Any help greatly appreciated!
Alex
I have an Ecler NZA4-400 amplifier that uses 4x Hypex UCD400 Class D Modules. The amplifier powers on fine and I can see input signals at good levels in the Eclernet software that you can manage the amp with.
The problem is there seems to be no gain in the amplifier( If I turn the volume control right up I can barely hear the output and it measures at less than 0.1V with a DMM.
Anybody had any experience of this before or any ideas what might be wrong?
Any help greatly appreciated!
Alex
- ...
- 2 posts total
- 2 posts total