Dented Tweeter?

Iv'e had the same problem,the baby goes right for the tweeter everytime! Arons approach is the best for certain low risk solution.You can easily remove the tweeter butterfly and gently with your fingertip push the dent right out.Also rub the entire inner suface in a circular motion as this will restore the original shape.I've done this a couple times and you can't tell it was ever dented...Good Luck!

I second, or third, using tape, worked perfectly for me.

Thanks everyone for the advice. However tempting the sucking method is, it may not work on the metal tweeter. I removed the tweeter last night and it was a VIFA D25AG-35 1" dome w/ 6 ohm capability. I did try and use tape before I made the post, but it would not remove all the dents. I haven't tried to rub out the tweeter yet, but Madisound had a drop in replacement for $28.95. Not bad and the tweeter was very easy to remove. Should I buy two, so the tweeters can age togeter, or is burn in more noticable on the midrange and woofer? From what I have read, the Revelation 3s have off the shelf Vifa Drivers (at least for the 4 1/2" and the 1" drivers. Not sure about the woofer. This seems to be good news since the company is no longer and the speakers sound to good to replace. Thanks again for all the advice.
Scootdog

Scoot that's good news. Considering the low-ish cost, why not replace both tweet's & retain the old one as a spare for possible future replacement needs? Or at least buy one spare while they're still available - cheap insurance.

I have a dented metal dome Thiel 2 2. The manufacturer said they have done tests and unless the dome actually hits the magnet, they don't sound worse.

That seems counter intuitive, but I haven't notice a difference.

Nevertheless, I bought a new tweeter anyway so that when I sell them I won't have to deal with that issue.