cones or sorbothane or both?


my next mission is to isolate my minimalist system.
please post your experience with isolation devices.
which one is better, cones or sorbothane? which device is best for cd player, amp or speaker? is it a good idea to use both (ie. sorbothane, puck, cone in that order under a component)? any links for cheap accessories and DIY products? no megabuck rack system or sand filled ziplock please. keep it simple and elegant. thx.
karabiyikoglu
In my humble opinion, the best, easiest, and not necessarily most expensive, is Zoethecus. No need to fuss with cones, blobs, etc. A really well engineered rack should be all you need, and I think Zoethecus fits the bill.
Contact Ken at Neuance. He does a shelf that does a fantastic job without a rack.
Hey, what about sorbothane layers between stainless stell washers (the interface between different materials should send a reflection of the vibrational wave back into the sorbothane for further dissipation). The place stainless steel ball-bearings at the top to couple your system to the washer-sorbothane sandwiched structure. I think ones can do this for about $8 for four sets with three layers of sorbothane. I am tring it this weekend.
Salsero
You can either transmit vibrations, or absorb them. Most soft or rubbery materials absorb the vibrations, and then re-release them back into the equipment. If you provide a direct coupling to allow the vibrations to exit, then you do not re-release them back into the equipment. I use Audiopoints, which are more than a simple cone, and are patented and engineered to do the job of evacuating the vibrations better than others I have tried. They look like simple cones, but the materials and geometry make the difference.
Correction to TWL. If a rubbery material absorbs the vibration, the energy is disipated in the form of atomic vibrations. Once the energy is absorbed, it will not be "re-released". This is based on the visco-elastic model of vibrations. Some energy will make through the rubbery material either if it is in a frequency where the material can't absorb it (i.e. the resonance frequency) or if the energy coming into the material is to high for complete dissipation.

Salsero