2. amps-preamps
  3. 1137226028

Classe CA-101 Remote turn on Module?

I recently purchased a pre-owned Classe CA-101, on the back it has a phone style jack where a remote trigger module would plug in to turn on the amp with my pre-amp, It does not have the newer style 1/8" mini plug 12 volt trigger input. Classe does not make these anymore, does anyone know where I can still buy one, or how to modify the amp to be able to use a 12volt trigger?

Thanks
RP.
soundgravy
gbart
290 posts
 
Can, I sent a reply to your PM. Contact the Classé factory first about your problems with the pigtail. It may be defective.
sconstantin
1 posts
 
Very old thread, but I am looking to do the same thing.  I have a CA-400 and ideally I would like to trigger the power with the 12V trigger on my processor.  Anyone have any luck doing that?
virgiltoys
1 posts
 
Very old thread, but I am looking to do the same thing. I have a CA-400 and ideally I would like to trigger the power with the 12V trigger on my processor. Anyone have any luck doing that?
Post removed 
johnfortav
1 posts
 
Does the 12v need to be a pulse for this to work if I only need it to turn the amp on? I have 6 amps and plan to use a Furman sequential turn on power box to turn on/off amps. I don’t want to power all on at the same time. Would this work if I feed the 12vdc from a constant source and switch the power feed to the amps for on/off? Also wondering if there will be turn off thumps if I switch the power off from the sequencer?
More to discover