Choosing the best speakers for my system.


Hello everyone. I am currently attempting to build a vinyl listing system. I am a musician and currently only have a stanton str-150 (built in preamp), running through a mackie mixer into some behringer BX5's.

I have saved up some money and I am pretty set on getting the following:
Clearaudio Emotion Turntable
Mesa Boogie Baron Power Amp

I will be listing to a lot of more aggressive music, rock, metal, electronica etc.

I have little control of my room size as I will be moving soon.

I am looking for a good 2.0 or 2.1 speaker set up and suggestions on a good preamp for the Clearaudio turntable.

I am considering some magnepan mg1.6 qr's (with or without a sub??) or maybe some Gallo Referance 3.1's (with or without sub??)

Any help would be much appreciated.
-Zak-
I
zakmetal
Do you already have the Mesa Baron or have a lead on one? Those aren't so easy to come by.

The Maggie 1.6's are much loved, but they're hardly the first choice for aggressive heavy rock, metal, or electronica. The Gallos would be a better match for that, as would some of the multi-woofer PSB or Paradigm tower speakers.

Knowing your budget would certainly help.

Although it's a lot cheaper, I think the Technics SL1210 M5G would be a better turntable for hard-driving rock. It's speed accuracy and consistency is relentless. Put the KAB fluid damper, a Herbie's Way Excellent mat, the LP Gear ZuPreme headshell, and SuperSpike feet on it, and it'll really rock out with great drive, slam, and surprising clarity. Start with the M5G or you have to get the tonearm rewired though.
Zak-
We seem to have similar musical tastes. Budget would be a good thing to know though.

I'm very biased since I just took delivery of a set of Micro Walsh Talls, but if you like the transparent sound of the maggies, you might want to consider speakers from Ohm.

A lot of my music is pretty aggressive: Kyuss, Tool, Helmet, Opeth and Porcupine Tree are what I've listened to today. The Ohm's present it straight-forward and with detail I've never heard before. If you went with the 100-S3 or higher, you most likely would not need a sub.

With my MWT's, I know a sub would improve things on the bottom end, but it's more than passable at this point.

The pre-amp I leave to more knowledgeable folk on the forum...
Thanks for your help dudes. Its awesome to talk to people that are knowladagble about this and aren't blowing me off just becuase I said metal. Their is no one in Louisville (Ky) that I have found that is in to this and into metal.

Johnny B: I will get a Baron one way or another. I have played Mesa amps for years and I have spoke with some old school Mesa guys and they said that this is right up my ally. Plus its just cool to have a Mesa audiophile amp.

I have heard that the clearaudio is amazing but since you suggested the technics, would my stanton str8-150 with an "S" arm be just as good. I have been pretty happy with that but I only have a Stanton 680.V3 cart on it. I have a Technics but really didnt like it.

Parasound:I listen to a lot of Black/Death Metal and some weird breakcore electonica i.e. Venitian Snare, Hellfish etc. I want something with some punch that will be very aggressive sounding while still having a low level of ear fatigue at reasonable volumes.

Budget for speakers would be $1500 max.

Also is building my own speakers a bad idea? I have build many guitar cabs, pa speakers, and car boxes before.

Thanks a million for the help dudes.
-Z-
06-11-09: Zakmetal
Johnny B: I will get a Baron one way or another. I have played Mesa amps for years and I have spoke with some old school Mesa guys and they said that this is right up my ally. Plus its just cool to have a Mesa audiophile amp.
Yeah. I have had a DC-10 for 9 years; sure wish I had a Baron, but that's a lot of hardware!

I have heard that the clearaudio is amazing but since you suggested the technics, would my stanton str8-150 with an "S" arm be just as good. I have been pretty happy with that but I only have a Stanton 680.V3 cart on it. I have a Technics but really didnt like it.
I wouldn't say the Stanton is in the same league with the Technics. Which Technics do you have, and how old is it? The stock SL12x0 mkII thru mkV is so-so unless you get the tonearm rewired (about a $170 job) with something good. The M5G has upgraded wire from the factory. From there, as I said, upgrade the mat. feet, and headshell, and get a fluid damper for the tonearm, and it elevates its performance to compete with $1500 turntables.

As for your cartridge, www.kabusa.com specializes in improving performance of the Technicss and Kevin the owner-operator likes some of the Stanton carts quite a bit. Check out this page. Also, I think an Ortofon 2M Blue would be a great cart to get lots of quickness and slam at a decent price.

For speakers, if you have the room, you may want to consider the Cerwin-Vega CLS-215 or CLS-15 as they're easy to drive, can go very loud, and yet some high end reviewers consider them capable of some pretty refined sound. Easily within your budget as well.
Go with the Technics.
Stay far away from Maggies, power hungry, hard to set up and not really a "metal" type of speaker.
You need a pre and phono pre. Consider an Adcom, parasound or B&K with built in phono.
PSB's are a great choice. The older ones really have slam, are efficient and are not fatiguing (stratus series).