Cassettes.......pre-recorded and otherwise....


WHile most serious audiophiles have disowned pre-recorded tapes since their mid-80s heyday when they outsold LPs(or even before) ...they were never known for hi-fidelity and for good reason...cheap tape and hi-speed dubbing made them unreliable and almost unlistenable...however home-taping...in real time...with a decent tape...and recorder..was a significant improvement...however by the time this process really advanced...dolby S, etc...the CD had surpassed the cassette...at any rate...any decent pre-recorded tapes that come to mind? I know BASF chrome was used briefly in the 80s...and HQ cassettes in the 90s...any others?
128x128phasecorrect
There was a company, I think called In Sync, that made audiophile cassettes in the 80's. I have a stack of them somewhere. They were very fine...I recall they used Maxell tape, and were dubbed in real time. They had a very interesting collection of historic recordings, well-remastered (such as Karl Muck doing Wagner, and some French composers conducting their own works in the 20's and 30's), and then some more current audiophile stuff, like the Skrowaczewski Ravel with Minnesota. I have a stack of them around here somewhere...haven't listened to them in quite a while, but I have fond memories of them. Maybe you can find them on Ebay or at Irvmusic.
well, it's all what you enjoy. Cassettes are pretty bad from a pure technical standpoint. there were not designed from music reproduction. The wow and flutter is high as is the THD, which is part of what people liked about cassettes i think. MY favorites for home recording were the denon metal tapes with ceramic housing. You kid hit them at a decent level without all that ridiculous distortion.
I'm gonna skip the technicalitites of thd, wow/flutter, pleasing waves of distortion, and will get right to the point. A top Nakamichi, Tandberg, or Revox/Studer tape deck (with proper tapes and corresponding equipment) can and will sound better than your $10K Sim Audio or Krell CD-player. It will do everything right (unlike a cd-player), will not have a piercing digital edge at higher volume level, and won't sound like a computer built from zeros and ones. Some of these tape decks cover 10hz-35khz with a S/N ratio of the best of CD-players. The Nakamichi Dragon has a 0.019 % THD. Are you claiming you are going to HEAR that? Not even your dog will. This thd is normally found in $5K CD-players.
It is a fact that your favourite tube amp measures a thousand times worse distortion than these tape decks, yet you find it pleasing to your ears and prefer it to solid state amps with virtually no thd... It's all in the listening and what pleases your ears. We can go on about white-paper measurement all day, they mean jackshit.
If you haven't owned one of these tape decks please try them one day and you will feel the sudden urge to remove your above statement.
Cassettes are, believe it or not, making a small comeback recently with underground music and DIY musicians who have some recorded tracks that are not worthy of a vinyl pressing, or small labels that want to produce something on the cheap and easy. I've bought a few over the past couple years and found a Technics deck in good condition for $20 to play them on. I was surprised at how good they sounded. Smooth analog sound and plenty of headroom. Not as good with separation of notes and detail as vinyl but not as bad as I thought it was going to be.
I have to agree with Milanv, I once owned a Revox B215, that was freaking amazing. I had to struggle to hear the differnece between it, and my B77. Only on my Sony TC-755 could I easliy tell a difference, and that was in the bottom end. (sony goes down stairs like none other) Hence in a moment of stupidity sold the Revox. I am now using my calibrated Advent 201A to make tapes for background music when company is over. Surprising, it's a very respectable machine. Milav is also spot on with regard to the top Nak decks. I still use cassettes and enjoy their convenience. While I would never sit and 'seriously' listen, you may be stunned at what a well calibrated machine can do.