2. tech-talk
  3. 960770099

Carver panels

I need dimensions and construction details for building a pair of Carver Amazing Loudspeaker Platinum Edition Mk. IV, including the front and back driver box covers. I have a pair of the 60" ribbons and TEN 12" T-style woofers. I will increase the height of the baffle to about 84" and the bottom width to 36" to accomodate the extra woofer/sidde. What I need are the location of where to place the cutouts for the woofers and drivers. Any help would be greatly appreciated.
maxwell
grumpybbc3b3
39 posts
 
Maxwell, if you can hold on a few days I will be happy to get the measurements of of my Carver's for you. Mine are not Platinums, they are the original series. They used to have 2 30" ribbons but have been update to the 60" ribbons. As far as I know the panels are the same size. Please write to me at grumpybb@aol.com My speakers are in storage at the present time or I would get you the measurements immediately.
msprout63b509
1 posts
 
Hello,If you need the x-over component diagram i could send you a copy. Also the Platinum only used 4 woofers per side. The panels are 27"wide at the top,34.5"wide at the bottom,66"high and a little over 1" thick. Ribbon cutout is 2"from the straight side and 2.5" down from the top. Woofers are 3" from the ribbon and start 6.5" down from the top.My e-mail address is msprout63@aol.com if you would like the x-over info send me your home address and i'll send you a copy. Good luck;Bob
More to discover