Cal Audio CL-10 and Theta GenVa - - - TLC?

I have a total of 6 Theta TLCs in two different systems. In one system I have four in series followed by a Monarchy DIP and then an Assemblage UJB-1. The DAC I am using in that system is a Theta Pro Basic IIIA. I would recommend that you do not skimp on digital cables and 75 ohm connectors. I modified one of my first TLCs with 75 ohm BNC connectors and DH Labs D-75 cable. The improvement in sound was as great as adding a TLC. IMHO an even bigger improvement in the quality of sound is when I eliminated the BNC connectors and soldered Illuminati Ohm-Aha 75 ohm cable directly to the circuit boards! The Theta Pro Basic IIIA now sounds fantastic. Soundstage is clear and deep with natural sounding cymbals. Music is very natural sounding, relaxed and transparent.

Thanks for all the input.

Two things concerning the TLC:

1) The Coax connections have a common ground, so if you go in Coax and out Coax the Jitter will increase about 600%. If you go in Optical and out Coax Jitter drops by 82%.

2) The TLC works great in my system, but twice as nice with the 9v TLC Power Supply Upgrade!

I rechecked the test data on the TLC when hooked up Coax in and Coax out and found that the amount of increased Jitter is 16% and not 600% which was the amount of increased Jitter associated with the AA DTI+ when hooked up in this manner.