Building my own roomlens

Go to www.audioasylum.com and perform a search in the tweaks asylum using the word "roomlens".

Hi, go to this address for details, I plan to build my own within a week or so. www.nd.edu/~gweaver/RoomLens.html

I've built five of them for myself and two for a friend, and they work! I use nominal 2" PVC pipe (Home Depot, Yardbirds) which is 2 3/8" outside diameter. I cut three 6" x 12" pieces, one of 1/2" or 3/4" MDF, two of 1'8" masonite, clamp together and cut three 2 3/8" holes--special dill or hole saw. The MDF is the bottom of a 12" x 6" x 4" box, which I fill with concrete for stability--not "dark matter", but you could mix in something to approximate that. Lots of details missing, but if you can do elementary carpentry, it's easy. One masonite piece is the base lid, the other goes at the top to keep the pipes parallel, and gets trimmed to a much smaller size, to look nice. I painted mine white.

Thanks, guys. I need details, Tom_Nice. That is where the problems lie. I've read just as many posts from people who have made them "willy-nilly" and had bad results. I am definately going to build my own, If yours are good, post an excruciatingly detailed explanation of how you did it. 1. Are the tubes stuffed? 2. Are the tubes sealed at either end? 3. How long are the tubes? 4. How far apart? I can definately handle "elementary carpentry, but I will not start until I have the whole project outlined exactly on paper.