Sean's advice is excellent. You could try the CARA software as well. It's very helpful at speaker and listener positions. As Sean said, it is doubtful you will solve the problem, but you should be able to reduce the problem to some degree. Everest's book describes some more elaborate bass attenuating devices (such as Helmholtz resonators). They can be difficult to build, but can be very effective, when you have a very specific peak as you do.
Bass/Room probelm
I have theil 2.2s that are place four feet out from the back wall (all glass) and 3 feet in from each side wall in an L shaped room that is roughly 24 ft by 22 ft with a 11 ft by 11 ft inset in one corner. Using a radio shack spl and stereophile test cd (vol 1)my bass response measures (and sounds)10db higher than normal at 31 hz and 10 db lower than normal at 64 hz and is otherwise pretty flat from 20 hz to 150 hz. What is going on? Is there anything I can do to address this with speaker placement/ room treatment etc?
Thanks
Greg
Thanks
Greg
- ...
- 8 posts total
- 8 posts total