You will find a good part of the following thread to be relevant to your questions:
http://forum.audiogon.com/cgi-bin/fr.pl?ymisc&1228674146
As you will read there, recent (but not some older) 20 amp receptacles have a T-shaped slot for the neutral prong, which allows them to accept both 15 amp and 20 amp plugs.
I agree with LK that I would not feel comfortable plugging directly into the wall. I would want the protection of a surge suppressor, that is dedicated to the audio system.
I'm uncertain about the concept of having multiple dedicated lines for different parts of the system. I would be concerned that voltage offsets could be introduced between the grounds of the different components, which could lead to ground loop noise. Same goes for having parts of the system on a surge suppressor, and other parts of the system on a different suppressor or no suppressor -- the result would be some degree of isolation between the ac grounds of the different components in the system, at least at high frequencies, due to inductive filtering in the suppressors, and inductance in the house wiring, which might cause ground loop issues.
The need for a line conditioner (as opposed to a simple surge suppressor) will, as LK indicated, depend on the quality of your ac supply, and also on the designs of the power supplies in your particular components. There might be less need for one if you have a dedicated line, as you stated (depending on whether the significant noise sources are elsewhere in your house, or if the noise is present on the wires that come into your house). Other people's experiences can initially point you in what are hopefully promising directions, but a conclusive determination can only result from trial and error, imho.
Regards,
-- Al
http://forum.audiogon.com/cgi-bin/fr.pl?ymisc&1228674146
As you will read there, recent (but not some older) 20 amp receptacles have a T-shaped slot for the neutral prong, which allows them to accept both 15 amp and 20 amp plugs.
I agree with LK that I would not feel comfortable plugging directly into the wall. I would want the protection of a surge suppressor, that is dedicated to the audio system.
I'm uncertain about the concept of having multiple dedicated lines for different parts of the system. I would be concerned that voltage offsets could be introduced between the grounds of the different components, which could lead to ground loop noise. Same goes for having parts of the system on a surge suppressor, and other parts of the system on a different suppressor or no suppressor -- the result would be some degree of isolation between the ac grounds of the different components in the system, at least at high frequencies, due to inductive filtering in the suppressors, and inductance in the house wiring, which might cause ground loop issues.
The need for a line conditioner (as opposed to a simple surge suppressor) will, as LK indicated, depend on the quality of your ac supply, and also on the designs of the power supplies in your particular components. There might be less need for one if you have a dedicated line, as you stated (depending on whether the significant noise sources are elsewhere in your house, or if the noise is present on the wires that come into your house). Other people's experiences can initially point you in what are hopefully promising directions, but a conclusive determination can only result from trial and error, imho.
Regards,
-- Al