B&W Nautilus 800.....where's the bass?

Arcoleo, Thanks for the suggestion. I will try repositioning the speakers first. If that doesn't work, then maybe I'll try different cables.

Arcoleo, what amps are you using with your 800N's ?

Everybody can have a say. From Judy to ahcjmh1@. So here's mine

Reality does bite and when all is said and done, the B&Ws need power and current. So the combination of amp + speaker cables is rather critical. I power my 802N with a pair of Mark Levinson 33 amps via 2 separate pairs of Transparent Reference speaker cables for biwiring setup. The ML33 are supplied with individual 35A power lines from my AC mains box. So plenty of current on demand the music is just seamless.

The N800 have an internally built downfiring subwoofer. Well designed and sounds very tight. Again it needs current to run it. No point if the amp is rated 300W but unable to provide high current output continuously on demand. I have heard a thumping drum track like never before on the 800 but each were powered by ML 33H (which ran hot).

Power amps that share a common transformer beware, the 800 and 802 will soak up current like never before......IMHO better to go with monoblocks each powering the 800 or 802s.

Avent91, The amps are Chord Electronics SPM6000 monoblocks. 750wats/speaker. Cables are Transparent reference XL, the current version.

Just received my Classe 700 W mono block amps. Sincere thanks to those who suggested I lose the Adcom amp. You were all right on the money. These 800's have so much bass now I cannot believe an amp change could make such a difference. Mids and highs dramatically improved as well. As a new guy I just learned a valuable lesson about watts AND current. I even dragged out my 25 yr old Cerwin Vegas from the garage system and tried them on the new amps. Seemed like a harmless experiment at the time. Now I am shopping for a new amp for the garage! Thanks to all who responded.