Audio Alchemy power supplies.

It is going back a few years so it is hard to be specific. Not being a wizz with electronics I stuck to a standard design and decent materials. Good as the DLC is, I don't think it warrants anything more than the following. The transformer was 150 VA potted toroidal I think, but may have been bigger. However I used one that was lying around and otherwise would have been happy to buy a 80VA one for this application. I cannot recall what rectifier diodes I used, they were supplied by a local chap who said they would be best for the application...? The first filter caps were Nichicon Muse - I think about 5,000uF a side (but high is good). I used an LM317 and an LM337 for rectification, dropping the voltage about 10VDC (to about 16VDC is it - I cannot recall). Final filter caps were Black Gates, I think about 1,000uF a side (too high a value here can degrade things from my experience). I find there is no improvement in bypassing Black Gates with small polyprops and so did not in this case.

Thanks again to Redkiwi for supplying the details on the power supply. I'm going to build one this weekend.

Interesting to know there are enterprising electronic whizzes out there building from carefully chosen components for better sound! What about replacing components within, say, the DAC itself (dodgey?!) like 'audio-grade' capacitors with a slower/smoother discharge for more refined sound? Sorry if this is old hat. If it is what do you chaps suggest as beneficial changes? Of course there are companies who offer to replace the clocks in CD players but I would prefer to ruin my cheapo Midiman Flying Calf ($125 new from Soundchaser) than my lovely old Philips CD850 (bless its little geriatric socks). Talking of the Flying Calf (it's good you know) can the blasted 1/4" jack sockets be changed to RCA with any kit?