AMR CD-77 anyone tried rolling the tubes?

TKS for taking the time to post your observations.

Nice job Jason! I'm sure you understand that your conclusions for tube selection are system dependent (especially including PC's, IC's and SC's in that order in my experience). While you did a thorough job, there are some EZ80's that may be in the running for best at that position (one can be labelled almost anything but has a square getter and vertical holes along the outside of the plates, another Has very unusual plates that are at right angles). In the very rare category, there are the famous 6201 triple mica (usually labeled Valvo with blue print) sqaure getter. I can't find mine right now but I think they are pinched waist. There are also the GEC A2900 (12AT7 type triple mica is much better than the double mica). I am only telling you this because you may be as crazy as me and seek these rarities out. I am not using any 12AT7's in my system right now but these are considered the cream of the crop and are very expensive when you can find them. The only tubes I consider inferior are the ones that are fuzzy sounding as you put it. Others that are clear but are not a perfect match in your system will be the perfect tube in a different system. I have never heard a Westinghouse tube that was suitable for audio
and never heard a GE that wasn't bettered by Raytheon or Sylvania in any tube family (I'm not saying it isn't possible and in your case you found one that was in your system). Just food for thought from a tube rolling maniac.
Now, the reason I wrote is that I would like to know what other CD players or transport/DAC combos you have used that the AMR bettered? I'm just trying to gage where it stands in the pecking order. Thanks.

Bart

Interesting...my CD77 has Brimar EZ80 and GE 5687 as standard with Mullard ECC81

I've not heard of anyone getting a player with Brimar EZ80, Mullard M8162 (12AT7) and GE 5687. I have heard many are now getting La Radio Technique (grey plates with mica spacers that have two small holes in them) labeled Brimar, GE 12AT7 and GE 5687 or the Tungsram EZ80, Mullard M8162, Philips 5687 set that I got. Remember, my player is from the second batch to enter the US, way back in July of 2007. The Brimar I am referring to is an actual Brimar EZ80 with black plates and clear mica spacers with large wholes in them. The grey plate La Radio Technique labeled Brimars are from the time after Brimar stopped making EZ80 and starting buying them and labeling them. The grey plate La Radio Technique is the same as the Amperex, the Pope, the Philips and the Valvo as they were all Philips owned companies like La Radio Technique and they shared the same source for the tubes.

Since my original posting I have had the player updated to 77.1 status (that was a big improvement on an already killer player) and put Bendix 6900 in the 5687 spot. The Bendix tubes are everything you've heard, and a great pairing with the player in Digital Master 1 (no digital filter).

Does anyone know how much it would cost to re-tube with stock tubes?