if you are interested in the tenors i would also try the goldmund 29m which,as a former tenor 75wi owner,can tell you is a much superior amp,imo.it does everything as well as the tenors' do and better.better bass slam and quickness,mids and highs as good and as crystaline,and the ability to drive anything..4ohms and up easily.i use an audio tekne 'simona' preamp with my goldmund and it is the best preamp i have heard.i have had numerous arcs' and a hovland hp 100 and the 'simona' is by far the best. all wiring is point to point.the combo drives my piega p-10s and in the near future c-10 ltds,effortlessly.think about it.
amp & preamp for acapella violon
I would appreciate your recommendations for an amp & preamp
to use with my newly acquired Acapella high Violons with the
sub active bass. The speakers are still breaking in and have about 40 hours on them. My initial impressions are superb (specially the midrange horns and the plasma tweeters). I have a problem with the bass as I am currently
driving them with the Audio Aero Prestige single ended mono
blocks which do not seem to have enough power to control the
lower frequencies. The rest of the system consists of:
DCS Verdi/Purcell/Elgar Plus all with the DSD firewire
Hovland pre
Kimber Select 1030 interconnects and digital cables
Kimber Select 3038 speaker cables
various Shunyata power cords
The amplifiers and preamps I have in mind are
Halcro dm58/68 and Halcro dm10 pre
Edge Signature mono blocks and Wyetech Opal pre
Chord SPM 6000 mono blocks and top of the line Chord pre
Audio Research ref 300mk2 and ref 2mk2 pre
If anybody has experience with tube amps like the Tenors or
Vaics or Wavacs or any other high powered single ended triodes (which I prefer) on these speakers pls respond ASAP
Likely additions to the system in the near future will be
either the Clearaudio Master Reference turntable (with the
Clearaudio arm) or the Simon Yorke turntable to replace my
current SOTA Star Saphire & Alphason arm setup. My cartridge
which is the Koetsu Onyx Saphire will stay with system.
Thanks and happy new year to all in advance.
to use with my newly acquired Acapella high Violons with the
sub active bass. The speakers are still breaking in and have about 40 hours on them. My initial impressions are superb (specially the midrange horns and the plasma tweeters). I have a problem with the bass as I am currently
driving them with the Audio Aero Prestige single ended mono
blocks which do not seem to have enough power to control the
lower frequencies. The rest of the system consists of:
DCS Verdi/Purcell/Elgar Plus all with the DSD firewire
Hovland pre
Kimber Select 1030 interconnects and digital cables
Kimber Select 3038 speaker cables
various Shunyata power cords
The amplifiers and preamps I have in mind are
Halcro dm58/68 and Halcro dm10 pre
Edge Signature mono blocks and Wyetech Opal pre
Chord SPM 6000 mono blocks and top of the line Chord pre
Audio Research ref 300mk2 and ref 2mk2 pre
If anybody has experience with tube amps like the Tenors or
Vaics or Wavacs or any other high powered single ended triodes (which I prefer) on these speakers pls respond ASAP
Likely additions to the system in the near future will be
either the Clearaudio Master Reference turntable (with the
Clearaudio arm) or the Simon Yorke turntable to replace my
current SOTA Star Saphire & Alphason arm setup. My cartridge
which is the Koetsu Onyx Saphire will stay with system.
Thanks and happy new year to all in advance.
- ...
- 14 posts total
Cool! Violin High Subs are awesome speakers. Sorry I must have missed this post last month - but your Violins are going to be still breaking in for awhile yet. Unfortunately, your Audio Aero Prestige monoblocks are the only amps I have heard of that do not drive the Violins particularly well at all. We are a dealer of Acapella loudspeakers (and of Audio Aero). Check out our Acpella FAQ which lists Acapella/amp combinations used by a number of other Acapella owners, dealers, and, of course, us. http://www.audiofederation.com/dealership/acapella-faq.htm Please feel free to post or email any questions. -Mike (Audio Federation) |
Hello, we are also an Acapella dealer and show the Violon High's as our main reference speaker with the Wavac 833's. The Violon's do require a good 100 watts to really shine, and I would stick with quality tube amps to get the goods! I have tried solid state and it just doesn't do it for me. We also use the Wyetech Opal preamp as our reference and would put it up against anything. Both the Wavac & Wyetech are flat to 100k and really get the most from the Acapella tweeter. Another recommendation would be to change your cables from Kimber to either Stage III or Harmonix for maximum effects! The rest of your system looks great. |
Lucky you! I have heard Acapella Violon speakers with Wavac HE-833 Tube monoblocks, they are magical. Would certainly love to own ones in the future. I would also suggest using the Stereovox LSD-600 speakers cables. Now , I am using the Stereovox SEI-600 interconnects, of course I am very happy with them worth every cents.Many happy hours of music. |
Do not do anything final until you try the Edge NL-10s @ 225/ch. As has been proven at the last 3 THE shows, they can mate well w/many speakers. With my Sonus Fabers---beautiful (I won't even consider tubes, anymore). Give Tom a call at Edge and give 'em an audition. (Of course, I am not affiliated in any way w/Edge). |
- 14 posts total