amp for B &W 801


bought new 801s. Was told I need a high power ss amp to run them well. True? Wanted to get tube monblocks instead. should I do tube or ss? What brands/models work best with my speaker?
johntinear
I currently own 801's and have heard many different pairs in systems with a wide variety of electronics. My last two amps were the Pass ALEPH 5(60w/ch) and Krell KSA-300S(300w/ch). The 801's sound completely different with each one; warm, tubey, but a little loose in the bass with the lower power amp while the big amp is a bit more sterile in the highs but rock-solid, tight bass that has deeper extension. Tube amps will all have trouble controlling a 12" woofer as well as good, high-current solid state amp. Look at damping factor specs to see the difference. The best comprimise for tube sound with the good transistor bass is the Pass ALEPH series or Threshold SA/e series (circa 1992-94). You could also biamp with a combination of tubes on the top and solid-state on the bottom, but it is very difficult to get a perfect gain-match between different designs. Also, you would spend a lot of money on an experiment! My personal preference would be a really smooth, very high current solid-state amp with at least 200watts/ch, like the two mentioned before or Mark Levinson. 801's really come alive with higher power if you listen to music with powerful peaks. They will also reveal the differences between mid-fi quality amps and the true high end. If you don't want to spend the money for new high-end, search for good deals on used high-end. Don't settle for newer, lower quality amps for the same money . Good luck & enjoy.
These are great classic speakers but they always did seem a bit harsh and analytical with many solid state amps. As a compramise you might also try a digital amp like the Spectron Musician, which has qualities of a hybrid amp at 250 watts/ch.
I have 801s powered by Krell KAS 2s. They have been a great combination. I agee that with 801s you need a good damping factor which will stear you toward a solid state amp.
B&Ws have wild impedance curve - W - probably very few tube amps that can do it justice - look for SS amps that weight as much as they do!
First amp to give it an auditon is Aragon 2/8008 or 2/8008BB run bi-amp?!? If not good enough for your 801 and the rest of your system try something more exp like krell KAS then Levinson'll come to rescue. Rute.