Aesthetix Calypso How many versions?

Probably the same mod I just did to my Aesthetix Io, swapping most of the Mills Military for Roederstein precision metal film resistors.

The Roederstein's are the standard now. Quieter, lower distortion and superior resolution.

Part of the upgrade on my Io was a slight correction in the RIAA curve. Obviously this would not apply to the Calypso as it is a line stage only.

Those with Io's more than one year old, be aware of this upgrade. It's extremely audible and very inexpensive.

There was one early change to a few resistors that would/could become slightly noisy. This was done several years back after the first production models hit the market. I think you're good to go with any serial number above about 2650 or so. Of course, Jim White was good about updating the units that did have issues. They too would be fine.
There has been no other changes that I am aware of except Aesthetix did change tube types to help cure a noisy tube problem that seemed to be fairly common for a while.
The Calypso is a great preamp for it's cost even new.
I certainly wouldm't be afraid of a unit several years old.

The Saturn series (Calypso, Rhea and Janus) was designed from the outset with Roederstein resistors. The Mills resistor issue had already come to light by the time they were designed, and none were ever shipped with Mills resistors. Only the Io and Calliso needed to be updated with Roedersteins.

There have been minor changes in production of the Saturn series over the last 5 years, most of those occurring during the first 2 years of production. None are of great significance. If you call us with a serial number, we can advise if there are any updates available for the unit.

Thanks for all the strong support! It is greatly appreciated.

Jim White