A good cartridge match for a VPI Scout 1.1 w/ JMW-9T arm, under $1,000

Dynavector 20x2H if you have a phono pre that handles only MM; or a 20x2L if you have a phono pre that can handle MC.

Thank you all. I think the 2M Black will be a fine and safe pick.

I hope I can bring a little life back into this thread. I acquired a used turntable that came with a JWM-9T arm and a Nagaoka MP-300 cart. So far, I have been supremely happy with the combination. it is now time to replace the stylus, and I have learned that the mass of the JWM-9T (10.5 grams somewhat disputed), and the compliance of the MP300 (dynamic 7) make them a bad combination. 

This is my first higher end turntable, so I have to ask:
Do I: just replace the stylus on the MP300 because that is way cheaper than a new cart, and if it works, it must be OK,
or Do I: Get out there and find something new because I don’t know what I am missing.

I am specifically jacking this thread as there are 2 people on here that have experience with matching the JWM-9T with a Nagaoka. I await your advice.