2017 Honest Cabling that doesn’t promote bankruptcy


Looking for experiences and recs for current mid to upper mid level cabling solutions

I’m talking about ICs and Speaker cables that do not require plans for high jacking an armored car with a couple gallons of chloroform and a helicopter with a really big magnet?

Neither is it a matter of seeking out an ‘all system’ same brand and model loom, though it could be.

In Your opinion and or experience which signal cables (or mix of) have proven themselves recently to enable a revealing system to maintain or demonstrate its integrity, truth and musicality on its best level?

Or, in other words, With which current line of wires or ‘cables’ would you feel very confident using to connect your upscale stereo outfit in 2017?

New, or pre-owned?

… and why, please?
Thanks so very much. j
blindjim
Belden cable from Blue Jeans Cable for interconnects would be a smart choice. 

Belden cable is used in the pro area, and is made in US rather than China.

Put money saved into speakers and room treatment.
Silver on copper 18 ga solid core Teflon MIL SPEC Navy wire found on eBay works great, sounds fabulous. Perfect for all sorts of projects.
Start with some great ICs - like the Teo Audio GCs and Steve's terrific custom built ICs. For short runs, RCA ICs are perfect; balanced are fine but there is little to gain IMHO unless you have a really long run.

I'd be careful about close placement of the amps to the speakers - remember, even caps are micro-phonic and will *hear* the vibrations from those speakers. Especially true if you're using tubes.

Good luck - best approach is through trial and error. Every system is different and only you will know what works best. Let us know how you get on!
As usual everyone has different ideas, My point is that speaker jumpers make a big difference. I tried many and ended with solid silver. They were lost in moving and couldn't find the same ones so I ordered some from EBAY. Were not that good so I found a custom one from HK using VDH which I use for my ICs? Much better. As usual all ears differ. Just start with some solid copper ones by striping some electra cable. Good luck.